Mitsubishi is the most popular aircon brand in Singapore. If you own a Mitsubishi aircon, you may notice two common settings on the remote control: Econo Cool and Cool mode. Both these aircon modes are useful for different purposes. Many Mitsubishi users do not know how to use these remote functions and what they really mean. Let’s take a closer look at the key differences between Mitsubishi’s Econo Cool and Cool mode.
Comparison Table: Mitsubishi Econo Cool vs Cool Mode
Before we have a deeper discussion, let’s check the key differences in the table below:
| Feature | Econo Cool Mode | Cool Mode |
| Purpose | Energy-saving comfort | Regular cooling |
| Temperature Adjustment | Auto adjusts by ±2°C for efficiency | Fixed to user’s set temperature |
| Airflow Direction | Automatically varies to balance feeling | Constant unless changed manually |
| Energy Consumption | Lower | Higher |
| Best Used When | Room is moderately warm | Room is very hot |
| Comfort Level | Moderate, improves with time | Instant and consistent |
| Electricity Savings | Yes, noticeable over time | No |
| Fan Speed | Adjusts with temperature and direction | Usually fixed unless changed |
| Suitable For | Long hours of use | Quick, direct cooling |
What is Econo Cool Mode?
Econo Cool is a feature found in many Mitsubishi air conditioners. These aircons are commonly installed in HDB flats and condominiums in Singapore.
Econo Cool mode is a feature that saves energy by adjusting the airflow direction and slightly increasing the set temperature (usually by around 2°C). Even with a higher temperature setting, the smart control of airflow will keep you feel cool.
This mode works best when:
- You are using the aircon for a long time.
- You want to reduce your electricity bill.
- The outdoor temperature is not extreme.
What is Cool Mode?
Cool mode is the standard setting found on Mitsubishi and all air conditioners brands. When you choose Cool mode, you are telling the unit to bring the room down to the exact temperature you set.
When you use this mode:
- The aircon blows cold air until the room reaches the target temperature.
- Airflow direction remains fixed unless you manually change it.
- Cooling is faster and stronger than Econo Cool.
Econo Cool or Cool Mode – Which One To Use?
Choosing between these Mitsubishi aircon modes depends on a few factors.
Use Econo Cool Mode When:
- You plan to keep the aircon on for long hours (e.g., sleeping at night).
- You want to save electricity with a slightly elevated temperature.
- You prefer a slower but steady cooling.
Use Cool Mode When:
- You need quick cooling just after returning home from the outside.
- The weather is extremely hot.
- You want full control over the temperature and airflow.
Is Econo Cool Really That Efficient?
Yes, Econo Cool of Mitsubishi aircon is effective if you want to reduce electricity use. It raises the temperature slightly but changes the way air flows across your body. This can help you feel the same level of comfort while using less power. This is an intelligent feature of Mitsubishi aircon that can save your electricity bills significantly in the long run.
Does Econo Cool Feel Cooler?
Not right away. Cool mode gives faster cooling. Econo Cool is slower and more gentle. Over time, Econo Cool adjusts airflow so you don’t feel too warm, even the temperature is set slightly higher. It’s a balance between comfort and cost.
Can You Use Econo Cool and Cool Mode Together?
No. These are two separate modes. When you activate Econo Cool, it overrides Cool mode. You can switch between them using the remote control. Just press the Econo Cool button while in Cool mode, and it will activate the energy-saving feature.
FAQ
What is the main difference between Mitsubishi Econo Cool and Cool mode?
Econo Cool is an energy-saving mode that adjusts airflow and temperature for efficiency. Cool mode provides strong, steady cooling at a fixed temperature.
Does Econo Cool save money?
Yes, it helps reduce electricity use, especially when running the aircon for long hours.
Which mode cools the room faster?
Cool mode cools faster than Econo Cool.
Is Econo Cool suitable for all rooms?
Yes, but it works best in rooms that are already moderately cool or during nighttime use.
Can I use Econo Cool during the day in Singapore?
Yes, if you do not need fast cooling.
