Air conditioning is a must-have home appliance for Singapore’s humid weather conditions. Mitsubishi is the most trusted air-con brand in this country for its durability, energy efficiency, and performance. Choosing the right air-con unit and installing it properly can ensure the desired comfort.
Many homeowners do not know the correct installation process and therefore suffer in the long run.
Let’s have a complete guide on Mitsubishi Aircon installation in Singapore. We will cover different system types to use, HDB regulations, costs, common mistakes to avoid, and FAQs. Let’s get started.
Why Proper Installation Matters?
Even the best Mitsubishi Aircon will not perform perfectly if it is installed incorrectly.
Therefore, choosing the top aircon installer is essential. Apart from that, poor installation can cause water leaks, higher electricity bills, and noisy operation.
If you can install a Mitsubishi Aircon properly, you will get the advantages below:
- Correct aircon according to your room size
- Proper refrigerant for safe use
- Higher energy-efficient operation
- Compliance with HDB regulations
- Warranty protection
Mitsubishi Aircon Installation Cost in Singapore
The installation cost of Mitsubishi Aircon in Singapore may vary based on the type of system, the installer, and the complexity of installation. Below are some ideas on Mitsubishi Aircon installation cost.
Single Split System
Single split system is the most affordable option where one indoor unit is connected to one outdoor unit. These systems are ideal for a single bedroom or a study room. Price range: SGD 1800 to 2500 including installation.
Multi Split System (System 2, 3, 4, and 5)
Multi split systems have multiple indoor units connected to one outdoor unit. These systems are the most popular options for HDB flats and condos where several rooms need cooling. Pricing for multi split systems can be as listed below:
- System 2: SGD 2800 to 3500
- System 3: SGD 3800 to 4800
- System 4: SGD 4500 to 5800
- System 5: SGD 6000 and above
Ducted or Cassette System
Ducted and cassette systems are suitable for landed properties and high-end condos. They require ceiling works. Ducted systems require complex duct work. Price range: SGD 5000 to 10000 depending on design and capacity.
Additional Costs to Consider
Apart from the cost of the unit, you need to consider the following as well:
- Extra piping or trunking: SGD 100 to 150
- Outdoor unit brackets: SGD 150 to 250
- Removal of old unit: SGD 80 to 150
- Condensate pump (if required): SGD 200 to 400
Below is the summary of the cost of installation of Mitsubishi aircon:
| Aircon System Type | Typical Price Range (SGD) |
| Single Split (1 unit) | $1,800 – $2,500 |
| Multi-Split (System 2) | $2,800 – $3,500 |
| Multi-Split (System 3) | $3,800 – $4,800 |
| Multi-Split (System 4) | $4,500 – $5,800 |
| Multi-Split (System 5) | $6,000 and above |
| Ducted / Cassette Systems | $5,000 – $10,000+ |
Which Mitsubishi Aircon to Install?
In Singapore, Mitsubishi offers a variety of models to cater to the needs of different customer segments.
Below are general suggestions on Mitsubishi Aircon models:
- Single Split System
Mitsubishi single split or System 1 Aircon has one indoor unit connected to a single outdoor unit.
This is perfect for a home that needs cooling for only one space, such as a bedroom. - Multi-Split System
Mitsubishi System 2, System 3, System 4, and System 5 are examples of multi-split systems.
These systems have multiple indoor units connected to a single outdoor unit.
They are suitable for homes that have multiple rooms to be cooled. - Ducted or Central Systems
Central air conditioners are perfect for landed properties where whole-home cooling is necessary.
Ducted systems are great for keeping the interior design intact because there is no visible indoor unit in this system.
Whichever model you choose, make sure the unit has 4 or 5 ticks to ensure higher energy efficiency.
Mitsubishi Aircon Installation: Step by Step Guide
Step 1: Choose the Right System
Mitsubishi offers several system types for different home setups:
- Single Split System – One indoor and one outdoor unit, ideal for bedrooms or small living rooms.
- Multi-Split System – One outdoor unit connected to multiple indoor units, perfect for HDB flats and condos where space is limited.
- Ducted or Central Systems – More suitable for larger homes or landed properties.
When choosing your system, always check the NEA energy efficiency label. Higher “tick” ratings mean better long-term savings on your utility bills.
Step 2: Sizing the Aircon
Choosing the right size aircon according to the area of the room is important. An undersized unit will struggle to cool your room, while an oversized unit may cycle too quickly and fail to remove humidity.
Here’s a simple guide often used in Singapore:
- Small bedroom: 9,000 BTU
- Master bedroom or medium-sized room: 12,000 BTU
- Living room: 18,000 BTU or more depending on size
Your installer should perform a proper load calculation based on room size, number of occupants, and sunlight exposure before recommending the final BTU.
Step 3: Check Building Rules
If you live in an HDB flat, you must follow HDB regulations on outdoor unit placement, ledge usage, and mounting brackets. Non-compliance can lead to penalties or safety hazards.
Condo residents should check with the management (MCST) before installation, as many developments have strict rules on the placement of outdoor units. For landed properties, it’s important to consider unit positioning to avoid noise disturbance to neighbours.
Step 4: Budget for Installation
The cost of Mitsubishi aircon installation in Singapore depends on the number of units, pipe length, trunking, and accessibility of your building.
- Single split system: More affordable, suitable for single rooms.
- Multi-split systems: Higher cost but more space-efficient.
Always request at least 2–3 detailed quotations from licensed installers before making your decision.
Step 5: The Installation Process
A proper installation involves several key steps:
- Site survey and planning – Technician checks room layout, ledge space, and trunking routes.
- Indoor unit mounting – Unit is installed high on the wall with correct airflow direction.
- Outdoor unit installation – Unit placed securely on brackets or ledge with enough ventilation space.
- Pipework and trunking – Copper pipes, drain lines, and cables are connected neatly.
- Vacuuming and leak testing – Essential to remove moisture and air from the pipes before charging refrigerant.
- Testing and commissioning – The system is powered up, performance checked, and warranty documents prepared.
Skipping steps like vacuuming or leak testing can seriously reduce performance and lifespan, so always ensure these are done.
Step 6: Maintenance After Installation
To keep your Mitsubishi aircon running efficiently, follow these maintenance tips:
- Clean air filters every 1–3 months
- Schedule professional servicing at least once a year
- Keep outdoor units free of clutter and ensure proper ventilation
- Inspect trunking and drainage regularly to prevent leaks
Install Mitsubishi Aircon with Us?
Learn about our commercial and residential aircon installation services in Singapore. Request a free site visit now.
Install Mitsubishi AirconFAQ
How much does Mitsubishi aircon installation cost in Singapore?
The cost depends on the system type, pipe length, and building layout. Single split installations are cheaper, while multi-split systems for the whole home cost more. Always get at least three quotes before deciding.
Can I install Mitsubishi aircon myself?
No. Refrigerant handling, vacuuming, and electrical wiring must be done by trained technicians. Self-installation can void your warranty and pose safety risks.
Do I need HDB approval for installation?
Yes, if you live in an HDB flat, your installation must follow HDB’s guidelines on ledges and mounting brackets. For condos, check with your management before installation.
How long does installation take?
A single split system may take 3–4 hours, while multi-split systems can take a full day depending on complexity.
Should I buy a brand new or reconditioned unit?
If you want long-term efficiency and warranty coverage, go for brand new. For temporary needs or budget-friendly options, reconditioned units are acceptable.
