Losing or misplacing the aircon remote is frustrating. But don’t worry. If you own a Panasonic aircon and can’t find the remote, there are still ways to turn it on. Let’s explore a few simple steps you can follow to power on your Panasonic air conditioner without using the remote.
Use the Manual Power Button on the Indoor Unit
Most Panasonic air conditioners have a manual power button. This button is usually found behind the front panel of the indoor unit.
Steps to Turn It On:
- Locate the Indoor Unit: Stand under your aircon unit inside your room.
- Open the Front Panel: Gently pull the panel upwards. Use both hands to avoid damaging the cover.
- Find the Power Button: Look for a small button near the right side, either labeled “Auto” or just a simple round push button.
- Press the Button Once: This will turn on the unit in auto mode. You won’t be able to adjust temperature or fan speed, but it will start cooling.
- Close the Panel Carefully: Once the unit is on, close the front panel securely.
Use a Universal Remote
If you have a universal aircon remote, you can set it up to work with your Panasonic unit.
Setup Steps:
- Insert Batteries into the Universal Remote.
- Press the ‘Set’ or ‘Mode’ Button Until the Panasonic Code Appears.
- Try Powering On the Aircon: If it doesn’t work, repeat the setup with another code.
These remotes are easy to find in electronics shops or online platforms in Singapore like Lazada, Shopee, and Carousell.
Using Panasonic Comfort Cloud App (For Smart Models)
If your Panasonic aircon supports WiFi control, you can use the Panasonic Comfort Cloud app on your mobile phone.
First, check if your model supports this. Your aircon should be an inverter model with built-in WiFi or a compatible WiFi adapter. Models like the Panasonic Aero Series with IoT are usually supported.
Steps to turn on Panasonic AC using Comfort Cloud App:
1. Download the Panasonic Comfort Cloud App:
Available on Google Play Store or Apple App Store.
2. Connect the Aircon to WiFi:
- Open the indoor unit panel and press the WiFi button (usually found near the manual power button).
- The WiFi light will start blinking.
3. Open the App and Register Your Aircon:
- Create an account in the app.
- Follow the in-app steps to add a new device.
- Enter your home WiFi details when prompted.
4. Control the Aircon:
Once connected, you can turn the unit on or off, adjust temperature, switch modes, and set timers — all from your phone.
Use a Smart IR Controller (For Non-WiFi Models)
If your Panasonic aircon does not have built-in WiFi, you can still control it with your phone by using a smart infrared (IR) controller like:
- Sensibo Sky
- Ambi Climate
- BroadLink RM4 Mini
These devices work by sending the same IR signals as a remote control.
Steps to turn on Panasonic AC using a Smart IR controller:
- Buy a Smart IR Controller: Available on Shopee, Lazada, or local electronics stores in Singapore.
- Plug in and Connect the IR Controller to WiFi.
- Install the Brand’s App on Your Phone.
- Add Your Aircon Brand (Panasonic) in the App.
- Use the App to Control Your Aircon: You can now power it on, adjust modes, and set temperature — all from your phone.
FAQ
How do I know if my Panasonic aircon has a manual button?
Check the front panel of the indoor unit. Most wall-mounted split units have a small button inside, near the right-hand corner.
Can I adjust temperature without the remote?
No. The manual button only turns on the unit in auto mode. To change the temperature or fan speed, you’ll need a remote or smart controller.
Will using the manual button damage my aircon?
No. It is completely safe. The button is made for emergency use when the remote is unavailable.
Where can I get a replacement Panasonic remote in Singapore?
You can find it at hardware stores, aircon service centres, or online marketplaces like Shopee, Lazada, or Qoo10.
Does every Panasonic model support smart controllers?
No. Only selected inverter models with WiFi or infrared compatibility will work with smart home controllers. Check your manual or ask Panasonic Singapore.
